Коды ошибок (ERROR CODES) ГНК FornovoGas TW1-M and TW1Na-M

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Display

Код| Описание

------------------------------------------------------------------------------------------------------------------
-Erd1-| LCD 1 single bar presence control, with identification of the absent line.
------------------------------------------------------------------------------------------------------------------
-Erd2-| LCD 2 single bar presence control, with identification of the absent line.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Communication with Host

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErLn-| The computing head verifies the existence of polling from Host every 5 seconds at least. If there is no polling, it stops the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Set-up data missing

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErSU-| If there are no Set-up data or they are not conformable, the computing head does not deliver and operator must input these data.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Maximum system pressure error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErHP-| Verifies the status of the pressure sensor (or pressure sensor switch) and in case of exceeded pressure delivering procedure will be blocked.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

High flow rate error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErHF-| Verifies the outgoing flow rate and if the maximum value is exceeded, delivering procedure will be stopped.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Presence of temperature sensor

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErSt-| Verifies that the signal coming from the temperature sensor Pt100, respects the functioning range (-60°C ÷ +60°C).
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Presence of pressure sensor

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErSP-| Verifies that the signal coming from the pressure sensor respects the functioning range (4÷ 20mA).
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Pulser Output not connected

Код| Описание

------------------------------------------------------------------------------------------------------------------
-ErPU-| Verifies that, from the beginning of the delivering process (solenoid valve start), the relevant pulses arrive within 6s.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Data congruence

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FECd-| Data correspondence control. The computing head checks, even during the delivery, both EPROM and RAM data. In case an error occurs, it finally stops the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

EPROM error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FEEP-| When nozzle hangs on, the computing head checks the EPROM checksum. If something is wrong, it doesn’t allow the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

RAM Error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FErA-| When nozzle hangs on, the computing head checks RAM. If something is wrong, it doesn’t allow the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

EEROM Error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FEEE-| When nozzle hangs on, the computing head checks the E²rom checksum. If something is wrong, it doesn’t allow the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Totalizer Error

Код| Описание

------------------------------------------------------------------------------------------------------------------
-Feto-| The computing head checks the totalizer presence. In case an error occurs, it finally stops the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Spare Inputs

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FEin-| The computing head verifies the presence of device dedicated to Self Service and other applications.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

FornovoGas TW1-M and TW1Na-M Computer Head
ERROR CODES

Mass flow meter control

Код| Описание

------------------------------------------------------------------------------------------------------------------
-FEMF-| The computing head verifies the communication and/or of the reset procedure of the mass flow meter; In case an error occurs it finally stops the delivery.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________