Коды ошибок (ERROR CODES) ГНК Graf PM-II Electronic head

[Mihail Grin]

BGraf PM-II Electronic head
ERROR CODES

Код| Описание
------------------------------------------------------------------------------------------------------------------
-Е 20-| Internal error caused by a microprocessor calculation error, a ram error or a new version of installed firmware and software.
------------------------------------------------------------------------------------------------------------------
-E 40-| External error which indicates the lack of power tension.
------------------------------------------------------------------------------------------------------------------
-E 41-| External error which indicates that the introduced price values is equal to the value "0".
------------------------------------------------------------------------------------------------------------------
-E 42-| External error, battrry low.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

BGraf PM-II Electronic head
ERROR CODES
продолжение

Код| Описание
------------------------------------------------------------------------------------------------------------------
-Е 50-| External error that causes a supply-stop and that indicates that the analog channel 1 causes an error because of LOOP. This control is perceived continually when the configuration of system works correctly.
------------------------------------------------------------------------------------------------------------------
-E 51-| External error that causes a supply-stop and that indicates that the analog channel 2 causes an error because of LOOP. This control is perceived continually when the configuration of system works correctly.
------------------------------------------------------------------------------------------------------------------
-E 53-| External error that indicates that display n1 does not work and causes a stop.
------------------------------------------------------------------------------------------------------------------
-E 54-| External error that indicates that display n2 does not work and causes a stop.
------------------------------------------------------------------------------------------------------------------
-E 55-| External error that indicates that the mechanical meter on display n1 does not work correctly and causes a stop.
------------------------------------------------------------------------------------------------------------------
-E 56-| External error that indicates that the impulse meters 1 and 2 are incoherent.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

BGraf PM-II Electronic head
ERROR CODES
продолжение

Код| Описание
------------------------------------------------------------------------------------------------------------------
-Е 60-| External error that indicates that the temperature measurement channel is in error because of LOOP. This control is perceived continually when the configuration of the system works correctly.
------------------------------------------------------------------------------------------------------------------
-Е 71-| External error that indicates a lack of flow.
------------------------------------------------------------------------------------------------------------------
-Е 73-| External error that indicates a defect of the external meter.
------------------------------------------------------------------------------------------------------------------
-Е 75-| Operating error that indicates the exceeding of the security pressure installed at parameter "18".
------------------------------------------------------------------------------------------------------------------
-Е 77-| External error that indicates that the supply flow has exceeded the maximum value installed at parameter "6".
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________

[Mihail Grin]

BGraf PM-II Electronic head
ERROR CODES
окончание

Код| Описание
------------------------------------------------------------------------------------------------------------------
-Е 80-| External error that indicates a lack of connection at the data line with external device.
------------------------------------------------------------------------------------------------------------------
-Е 98-| System message that indicates that there is no supply authorization on behalf of the associated pre or post payment system and the supply nozzle is extracted.
------------------------------------------------------------------------------------------------------------------
-Е 99-| System message that indicates that there is no supply authorization on behalf of the associated pre or post payment system.
------------------------------------------------------------------------------------------------------------------
_________________
С уважением,
Михаил Гринь
_______________________________________